Intelligent Track Safety Lights

Track Safety Pix
ROI Calculator Hand Controller
Comparison Chart Power Options
Owner's Manual Data Comm Links
Control Software MyLaps Integration
Mounting Options Support Programs
DESCRIPTION
FEATURES
SPECIFICATIONS
FAQ's
VIDEO & PHOTO

Model 6751AW
with 6760A Mount

Model 6751AW
with 6760A Mounts

Model 6752AW
with 6760A Mounts


Are they Wireless Corner Lights or are they Track Safety Lights?

RaceAmerica's Intelligent Safety Lights provide the track owner with standard flag colors combined with the flexibility to design more eye catching flag displays. These Safety Lights combine ultrabright 4-color LEDs and multi-segment displays with flag animation and automatic switching between flags to deliver flags a driver will see but not be distracted. All models of Safety Lights maintain two-way comunications with the tower to insure the flag desired at the turn is the flag displayed on the screen.

Intelligent Track Safety Lights are available in several models and operate from standard AC power or DC power sources. Data communications between the tower and the Intelligent Track Safety Lights can be through a proprietary wireless link or connected to the track's existing IP Network. The combination of wireless and DC powered enables the Intelligent Track Safety Light to be mounted at locations where no power or communications are available.

[ Previous Page ]

Model 6751AW
with 6760A Mount

Model 6751RW
with Rear Repeater
and 6760A Mount
  • High Visibility using Ultrabright LED's
  • Programmable Display Segments, 4-color LED's
  • Selectable Flag Animations


  • Wireless or Hardwired Communications
  • Built-in Wireless Signal Monitor for Easy Setup
  • Battery Powered or 110VAC/230VAC
  • Optional Rear Repeater


  • Control with Point & Click PC Screen
  • Control direct from MyLaps Orbits software
  • Control from Wireless Hand Controller
  • Control from Hand Controller iPhone App


Driver's View of Track Safety Light video on YouTube.


View this video of the safety lights from the driver's perspective taken by an HD camera mounted on the vehicle.

For more realistic viewing, click the FULL SCREEN button at the lower right of the video to expand the view to your monitor's full width.


[ Previous Page ]

Models of RaceAmerica Track Safety Lights

itsl4 itsl2 itsl itsl
Model 6752
Double Wide & High
Model 6750
Double High
Model 6751
Premium Height
Model 6770
Indoor Tracks
1,152 Ultrabright LEDs
16 segments
RGB LED colors
10-14VDC 2.3A
576 Ultrabright LEDs
8 segments
RGB LED colors
10-14VDC 1.2A
288 Ultrabright LEDs
4 segments
RGB LED colors
10-14VDC 0.6A
72 Ultrabright LEDs
RGB LED colors
Internal Battery
USB Charge Port
Data Comm:
Wireless
IP Network
RS422/485

Dimensions:
H: 28.0in (711mm)
W: 16.0in (406mm)
D: 2.25in (57mm)

Viewable:
H: 26.0in (660mm)
W: 9.88in (251mm)
up to 2,000ft (610m)
Data Comm:
Wireless
IP Network
RS422/485

Dimensions:
H: 28.0in (711mm)
W: 9.5in (241mm)
D: 2.25in (57mm)

Viewable:
H: 26.0in (660mm)
W: 5.0in (127mm)
up to 1,000ft (305m)
Data Comm:
Wireless
IP Network
RS422/485

Dimensions:
H: 15.25in (387mm)
W: 9.5in (241mm)
D: 2.25in (57mm)

Viewable:
H: 13.25in (337mm)
W: 5.0in (127mm)
up to 500ft (152m)
Data Comm:
Internal Wireless



Dimensions:
H: 6.25in (159mm)
W: 6.25in (159mm)
D: 3.50in (89mm)

Viewable Area:
H: 3.13in (80mm)
W: 4.75in (121mm)
up to 150ft (46m)


[ Previous Page ]
Can I design the flags for my track?
The TrackSafety software provides the ability to design up to 16 flags for use with the safety lights. Track Safety Lights consist of color blocks. Each block is programmable as red, green, blue or yellow then an animation is selected and applied to the selected colors and blocks. The flag is then saved for use.
Are the Track Safety Lights sealed units?
Track Safety Lights are designed for longterm outdoor use. Special 'swirl vents' in the bottom of the enclosure provide metered air flow for use in any high moisture environments without failure.
What type of DC power sourses can I use?
Track Safety Lights can be powered by a RaceAmerica Ruggedized Battery Pack (pn 6758A), a 12VDC battery, or a solar panel with a regulated output between 10VDC and 14VDC. A DC Interconnect Cable is added to the order matched to the power source to power the Track Safety Light.
Can I mix different models of Track Safety Lights?
Yes, differnt sizes and models of Track Safety Lights can be installed around the race track. The software will detect the units in use and display their size and shape onscreen. The software automatically adjusts for different characteristics of each Track Safety Light model.
Are the Track Safety Lights compliant with established standards for LED safety lights?
Yes, all models of Track Safety Lights comply with AKA standards governing LED safety light use.
Are the Track Safety Lights complatible with MyLaps?
Yes, MyLaps Orbit4 and Orbits5 software communicates with our TrackSafety software to control all Track Safety Lights on track.
Can I dim the Track Safety Lights for night racing?
Brightness control is controlled by the TrackSafety software. Brightness level is variable and can be set to match ambient light conditions from full sunlight to nighttime conditions.


[ Previous Page ]

Track Safety Demonstration Videos

How to configure and customize Track Safety flags TrackSafety and iPad Hand Control Demo How to enable and configure the Green-After-Yellow feature in TrackSafety
How to enable and configure the Green After Yellow feature in TrackSafetyEX How to enable and configure the Max One Blue Flag feature in TrackSafety How to enable and configure the Max One Blue Flag feature in TrackSafetyEX
Sample Safety Light Flags Driver's View of the Track Safety Lights
[ Previous Page ]